Home & Garden

DIY Guide to Tree Cutting & Felling: Tips & Suggestions for Cutting Down a Tree

Cutting down a tree may seem easy to an ordinary person, but the practice itself is risky and should be done skillfully and professionally. There are some basic tricks you need to have them right if you are to do the job yourself.

Whether the tree is a massive or a tiny one, safety still remains a priority.

Here are some important tips provided by the experts at tree trimming Arlington TX to follow when cutting down a tree of any size.

Gather all the necessary equipment; Protective gear-hard hat, leg coverings, steel toe boots, goggles and heavy-duty gloves. A First Aid Kit should also be readily available with all the essential medical supplies.

Before you begin the exercise; check the chainsaw to ensure that it has a sharp chain and a full tank of oil and gas. If possible get a ladder, rope, wedges and an Ax. Check the direction to which the tree leans, examine the orientation of the branches and the nearby obstruction. Figure out an easy escape route if things don’t work to your expectation.

First; make a horizontal cut that is not higher than your hip. Make another straight wedge cut and a back cut which will determine how the tree will fall. The back cut should be thicker than the two cuts and at least 1.5 inches just above the horizontal cut.

After making the three cuts, get ready to run anytime before the tree is on its way down. Don’t be curious to turn your back while running; focus on the falling tree instead to avoid the risk of being injured during the process.